July 2011
The roof is completed, and now so is the lamp. I am now putting on the first coat of white acrylic primer, a side at a time, to seal the card and stop subsequent coats of paint soaking in.
|
It's looking very Dalek Movie |
Compare to the top-down movie shot |
Undercoating |
Two Sides Done |
Not sure about the paint job |
I'm in several minds about the final paint colour. You see it reminds me of the TARDIS as seen in old comic strips from the 1960s. Although they featured the 2nd Doctor, the TARDIS was plainly modelled on the movie version, with very high stacked roof and a St John sign. However it was a very dark dark blue, almost black. Looking at the shape of this model, I am very much reminded of the Comics box.
However, looking back at the movies themselves (which I probably didn't see until the 1980s!), the box is plainly a very rich royal blue. OK, it's quite dark in the opening scenes of the first movie, but that's in Doctor Who's back garden, and pretty obviously at night. Once they get to Skaro the box is blue. So I've decided to go with blue.
|
That's more like it |
First coat of blue finished |
Might need just one more...
|
Let's get some handles on |
Waiting for varnish |
OK. 10 days into July and I'm satisfied with the final paint job. At this stage I would be varnishing, and giving the model a nice matt finish. However in the movies Tardis isn't matt. It has a shiny satin finish. You can see this in the first movie where one of the windows is plainly reflected in the paint surface of a corner post. So this box should be glossy.
Waiting for
varnish Waiting for
varnish Waiting for
varnish While touching
up...ARGH!! Repaired...phew!!
I'm going to have to buy some gloss (or preferably satin) clear varnish.
At this point I decide that I only want the window frames to be white. This means VERY delicately painting the inside of the window panels blue. I'm relatively successfull, and later I find a shop that sells Acrylic Satin Varnish! And it covers beautifully. At that point I notice that maybe my window painting wasn't that accurate, so I touch up the white windows once more just to cover the areas where I've gone over a bit too much with the blue. Later, I just tidy up the areas where I've gone too far with the white. This could go on all night.
And then - disaster! A splodge of blue goes onto the window pane...and the window! Luckily I manage to get it off the "glass", and a few coats of white and you can't see it anymore. I quit while I'm ahead. All I have to do now is varnish the base, and then the signs can be put on.
|
Signs on |
And Finished |
Long Shot |
Tardis and Friend... |
July 17th
OK, apart from leaving it on its side for a couple of days for the base varnish to dry, I consider this model finished!
December 2011
It was pointed out on the forum that the lamp housing actually isn't grey - it's just covered with dust and rubble. D'oh! I have therefore painted it blue. It also turns out that it has slightly the wrong St. John sign on. I shall rectify that as soon as I gain access to a laser-jet printer!
This Web Page Created with PageBreeze Free HTML Editor